● To set the unit to mute
After “BYPASS/TUNER” disappears and “MUTE TUNER” appears on the screen, release the
switches within one second.
Note:
• If you continue to press both [▼]/[▲] footswitches for more than 2 seconds, the looper becomes active(→P18).
• You cannot set the unit to bypass/mute from edit mode.
• When you press both [▼]/[▲] footswitches at the same time, the footswitch that is momentarily pressed first could
change the tone in some cases. Please avoid making sound when pressing the switches.
16
To Next Page
Loading...