Raycus RFL-C1500H User Manual

Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide of 1500W CW laser
Laser OutAlarm
Instruction:
The laser will get this alarm when it can not detect any laser
light signal. Laser out alarm occurs only when the laser is
emitting light
Solutions:
Restart the Device. If this error continues to occur, please
contact Raycus.
Laser Power Alarm
Instruction:
The alarm is generated when the emission of the laser cannot
reach the set value. Power alarm occurs only when the laser is
emitting light.
Solutions:
Restart the Device. If this error continues to occur, please
contact Raycus.
ACDC1 Alarm
Instruction:
AC/DC1 Alarm. Laser power supply out of work or sudden
power disconnect of the power supply system may cause the
alarm
Solutions:
Check whether the input AC voltage is normal. Restart the
laser to try when it is normal. If the alarm continues to occur,
please contact Raycus.
ACDC2 Alarm
Instruction:
AC/DC2 Alarm. Overcurrent or overvoltage inside the device
may cause this error.
Solutions:
Check whether the input AC voltage is normal. Restart the
laser to try when it is normal. If the alarm continues to occur,
please contact Raycus.
39

Raycus RFL-C1500H Specifications

General

Brand	Raycus
Model	RFL-C1500H
Category	Measuring Instruments
Language	English