Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide of 1500W CW laser
5
）
Do not look into the output head directly. Wear appropriate protective
eye glasses all the time when operating the laser
Do not expose this product to high humidity (humidity>
95%).
Do not allow this product to operate at a temperature
below the ambient dew point. (As shown in Table 4)
Table 4 Comparison table of constant dew point at ambient temperature and
relative humidity
Constant dew point table at ambient temperature and relative humidity
Ambient
temperature
（℃）
Maximum relative humidity
20% 30% 40% 50% 60% 70% 80% 90% 95%
20
-3.5 2 6 9 12 14.5 16.5 18 19
25
0.5 6 10.5 14 16.5 19 21 23 24
30
4.6 10.5 15 18.5 21.5 24 26 28 29
35
8.5 15 19.5 23 26 28.5 31 33 34
40
13 20 24 27.5 31 33.5 36 38 39
Laser operating temperature range
2.6 Attentions
1) Make sure that the correct voltage (according to Table 3) is used before
connecting AC current. Failure to connect power supply will damage the device.
2) Failure to operate the laser in accordance with the control or adjustment methods
specified in this manual may cause damage.
3) For the output laser collimated by the collimating lens, it is important to keep the
collimating lens clean, otherwise it will damage the device.
4) Please cap the output head when it is not in use. Do not touch the output lens at any
time. Use appropriate lens paper and alcohol to clean it if necessary.
5) Failure to follow the instructions may cause laser power loss, and such loss is not
covered by warranty.
To Next Page
Loading...
Need help?
General
