TYPE100/300 Operation and Installation Handbook
106
81004-3
Mechanical Drive Systems 49
Linear Drive Unit 53
Rotary Drive Unit 49
Sterndrive Actuator 56
Mechanical test (Linear, Rotary &
Hydraulic Drives 78
Mechanical Test (Stern Drive) 79
N
NMEA Interface
Cabling 74
O
Off Course Limit 85
Operating sense 78
P
Permanent Watch Alarm (SFIA) 90
Planning the Installation 21
Pump to Cylinder Specifica-
tions 35
R
Rate Level 84
Recording Calibration Settings 90
Response Control 94
Response Level 88
Reversing Hydraulic Pump 14
Rotary Drive Unit
Cabling 52
Mounting 49
Rotary Rudder Reference Trans-
ducer
Cabling 32
Mounting 30
Rudder angle alignment 77
Rudder angle sense 78
Rudder deadband 78
Rudder Deadband (Rudder
Damping) 87
Rudder Gain 83
Rudder Gain - Adjustment with
Speed 97
Rudder Gain Adjustment (Displace-
ment Craft) 96
Rudder Gain Adjustment (High
Speed Planning Craft) 97
Rudder Limit 84
Rudder Offset (Helm Adjust) 84
To Next Page
Loading...
