Raymarine Autohelm 100 - Page 32

Chapter 2: Installation
31
A
Parallel
Cable
entry
90°
Rudder amidships
± 60°
maximum
travel
permitted
D196/2
Min 101mm (4in)
'A' 140mm (5.5in)
Max 190mm (7.5in)
Min
75mm
(3in)
Max
310mm
(12.2in)
It is important to ensure that the dimensions (set out above) are within the
set limits and that the tiller and rudder reference arms are parallel to each
other.
A
D197
40°max
40°max
Min 101mm (4in)
'A' 140mm (5.5in)
Max 190mm (7.5in)
Min 75mm
(3in)
Max 310mm
(12.2in)
1. With the rudder amidships, the rudder reference arm should be
opposite the point of cable entry and at 90 degrees to the connecting