-
_--
.
c
28
L
Chapter 6: Calibration
6.1 Initial Calibration
SHALLOW AlAf3M
J
Initial Calibration Notes
Alarms
The shallow, deep, low anchor, high anchor and offset displays
can be
adjusted using the
OFFSET
and
RESET
keys.
The
ALARM
key is used to enable/disablethe alarms.
units
Alternating between feet and metres is achieved by pressing
RESIX
Exii
Initial
Calibration
To exit initial calibration and store the new settings, press DEPTH and
ALARM
together for 2 seconds.
To Next Page
Loading...
