Need help?Do you have a question about the Raymarine RVM-400 Series and is the answer not in the manual?
General| Brand | Raymarine |
|---|---|
| Model | RVM-400 Series |
| Category | Transducer |
| Language | English |
Essential safety precautions for installation and operation, including high voltage and power supply warnings.
Critical warnings regarding transducer cable length, grounding, operation, and cable handling.
Declaration of Conformity and compliance information for Raymarine products.
Information on product warranty, registration, and disclaimer of liability.
Guidelines for proper disposal of electronic equipment according to WEEE Directive.
Scope of equipment use concerning International Maritime Organization and SOLAS regulations.
Notes on document accuracy, product specifications, and copyright information.
Lists the specific Raymarine RVM-4xx series transducers covered by this document.
Details the purpose and content of the installation instructions manual.
References other Raymarine manuals for compatible sonar modules and accessories.
Notes on illustrations, user interface variations, and where to find operation instructions.
Description of RVM-4xx series RealVision™ Max 3D thru-hull transducers and their features.
Details improvements and features of RealVision™ Max 3D over previous versions.
Information on sonar channels, effective range, and compatible modules/displays.
Guidance on using optional extension cables for RealVision™ transducers.
Lists the components included with RVM-4xx series transducers.
Lists additional cables supplied for split pair transducer installations.
Provides detailed external dimensions for RVM-4xx transducers.
Specifies nut sizes for installation of the transducer hull nut.
Details the fitted cable lengths for RVM-400 and RVM-412/420 transducers.
Provides dimensions for the RealVision™ transducer cable connector.
Important warnings and cautions for selecting the optimal transducer mounting location.
Guidelines for choosing suitable locations on various hull types for transducer installation.
Specific recommendations for mounting transducers in cored fiberglass hulls.
Recommendations for minimizing electromagnetic interference during installation.
List of tools and materials needed for transducer installation.
Procedure for testing transducer operation before final mounting.
Step-by-step instructions for physically mounting the transducer through the hull.
Instructions for drilling holes in the vessel's hull for transducer installation.
Guide to assembling the external parts of the transducer onto the hull.
Instructions for assembling the internal components of the transducer within the hull.
Steps to complete the transducer installation, including sealing and tightening.
Guidance on applying water-based anti-fouling paint to the transducer for performance.
Best practices for cable types, strain relief, and shielding for optimal performance.
Requirements for routing transducer cables to avoid interference and ensure security.
Step-by-step guide to securing the transducer cable connector with the locking collar.
Instructions for directly connecting the RVM-400 transducer to MFD or sonar module.
Procedure for connecting split-pair RVM-412/420 transducers using Y-cable.
Information on available extension cables for RealVision™ transducers.
Final steps to connect transducer cables to the sonar-capable device.
Procedure for calibrating the RealVision™ transducer's Attitude and Heading Reference System.
Guidance on diagnosing and resolving common problems with the sonar system.
Detailed guide to resolving issues like no scrolling image or lost bottom lock.
Instructions on how to reset the sonar module to factory default settings.
Periodic checks for cables, connectors, and overall system integrity.
Instructions for cleaning organic growth from the transducer face.
Guidance on removing material that may bridge transducer and hull on metal hulls.
Procedure for reapplying water-based anti-fouling paint to maintain transducer performance.
Contact information and procedures for obtaining product support, warranty, and repairs.
Information on accessing video tutorials, training courses, and technical support forums.
Details on transducer dimensions, cable length, and weight.
Information on operating/storage temperature ranges and waterproof ratings.
Specifics on sonar channels, sensors, and sonar range for RealVision™ Max 3D.
Lists the standards and directives the product conforms to.
Lists spare parts available for purchase, such as locking collar and mounting kits.
Lists optional accessories like adapter cables and extension cables.
To Next Page