Raymarine AUTOHELM ST50 PLUS DEPTH - 6.2 Intermediate Calibration

ST60 plus Depth Operation and Installation Handbook
.._. _ _
Chapter 6: Calibration
3:
I
SECURITY
Intermediate Calibration Notes
RepeaterMode
Repeater mode allows the ST50 Hus Depth to repeat speed related data
already on the SeaTalk bus. There are two settings:
O=disabled and 1 =enabled.
Note:
lnitialcalibrationcannotbeaccessedwheniheunitisconfiguredasarepeater.
Exit Intermediate Calibration
To exii intermediate calibration and store the new settings, press DEPTH and
ALARM for 2 seconds.