Raymarine Dragonfly 7 - Removing the Display from the Bracket

1. Cradle Up position.
2. Cradle Down position.
Fitting the lock
With the display mounted in the cradle:
1. Remove the plastic cap that covers the cradles
locking hole.
2. For tting follow the instructions supplied with the
lock.
4.6 Removing the display from the
bracket
The display can be easily removed from its mounting
bracket.
1. If a lock has been tted, ensure it is in the
unlocked position.
2. Disconnect the cable from the back of the display.
3. Push the cradle release clip away from the
display as shown.
When the display releases you will hear a click.
4. Remove the display from the cradle.
30
Dragony 6 / Dragony 7