Raymarine Dragonfly 7 - Page 87

Time and Date set-up
You can specify your preference for the way that time and date will appear in all applications.
Menu item Description Options
Date Format
Allows you to specify the preferred format for the
display of date information in all applications.
• MM:DD:YY (Month, Day, Year)
• DD:MM:YY (Day, Month, Year)
Time Format
Allows you to specify the preferred format for the
display of time information in all applications.
• 12hr
• 24hr
Local Time: UTC Allows you to specify the local time zone that will
be used, in terms of an offset from UTC (Universal
Coordinated Time), in 0.5 hour increments.
• –13 to +13 hours (in 0.5 hour
increments)
Simulator mode
The Simulator mode enables you to practice
operating your display without data from the GPS
receiver or transducer.
The simulator mode is switched on / off in the
System Settings menu.
Note: Raymarine recommends that you do NOT
use the simulator mode whilst navigating.
Note: The simulator will NOT display any real
data. This includes safety messages.
Enabling and disabling simulator mode
You can enable and disable simulator mode by
following the steps below.
From the System Settings menu:
1. Select Simulator:.
2. Select On to turn simulator mode on, or
3. Select Off to turn simulator mode off.
Note: The Demo movie option is for retail
demonstration purposes only.
Tools & Settings
87