Chapter 6: Sounder Set Up 59
6. When the alarm clock sounds, it is accompanied by a message box
labeled ALARM CLOCK displaying the time.
The default setting is OFF.
Figure 6-5: Alarm Clock
UNITS...
You can set the units for each system parameter. The units you set will be
used to display all data, including information received from other
instruments on the system.
Depth Units
• FEET (default)
• FATHOMS
• METERS (Available in CE models only)
Temp. Units
• FAHRENHEIT (default)
• CENTIGRADE
Speed Units
• KNOTS (default)
• MILES PER HOUR
• KM PER HOUR
Distance Units
• NAUTICAL MILES (default)
• STATUTE MILES
• KILO METERS
Note: VRM distance is measured by the transducer’s paddlewheel and is
based on the Depth units you have set. If Depth is set in feet or fathoms, Dis-
tance is displayed in feet. If Depth is set in meters, Distance is also set in
meters. (METERS settings are only available in CE models.)
D6758-1
MAIN MENU
ALARM CLOCK...
09:09 am
To Next Page
Loading...
