17
Chapter 2: DSM25 Installation
2.1 Introduction
This chapter provides details for mounting the DSM25 and connecting to the A65
display.
For the system to display depth, water temperature and speed, you must install
the transducer type(s) capable of transmitting the appropriate data.
Planning the Installation
Before you install your system, plan the installation, considering:
• Correct transducer for your application
• Location of the sounder module, as described in Section 2.4
2.2 Unpacking and Inspecting the Components
Unpack your system carefully, to prevent damage to the equipment. Save the
carton and packing, in case you need to return the unit for service.
Check that you have all the correct system components:
D7738-2
DSM25
Owner's
Handbook
Digital Sounder Module,
part no. E63070
Mounting Screws,
No.8 (x2)
Owner’s Handbook,
part no. 81254
Power/Data Cable, 3.5m
part no. R69086
81254.book Page 17 Monday, March 6, 2006 2:29 PM
To Next Page
Loading...
