Raymarine DSM25 - Using Waypoints

40 DSM25 Owner’s Handbook
3.10 Using Waypoints
Marking a position enables you to return to that spot at a later date. A position is
marked on the screen with a waypoint. When a waypoint is placed, its details are
added to the Waypoint List and a vertical line labelled WPT (see illustration
below) is displayed on screen.
To place a waypoint:
... at your current position
1. Press WPTS/MOB. The waypoint soft keys are displayed.
2. Press WAYPOINT AT VESSEL. The Edit Waypoints box is displayed.
3. Press ENTER twice to save the waypoint with the standard settings.
... at the cursor
1. So that it is easier to position the cursor over the desired site, press PRESENTA-
TION and then toggle the SCROLL option to PAUSE.
2. Maneuver the cursor to the spot on the screen you would like to mark.
3. Press WPTS/MOB. The waypoint soft keys are displayed.
4. Press WAYPOINT AT CURSOR. The Edit Waypoint box is displayed.
5. Press ENTER twice to save the waypoint with the standard settings.
For greater details of how to place a waypoint, please refer to the Waypoints
chapter of the A65 User’s Handbook.
43
44
44
44
43
47
47
42
34
36
200 kHz
20
0
40
60
43 9
ft
WPT
WPT
WPT
WPT
WPT
WPT
WPT
WPT
WPT
WPT
ZOOM
ZOOM
FISHFINDER
SETTINGS
FISHFINDER
SETTINGS
A-SCOPE
A-SCOPE
PRESENTATION
PRESENTATION
BOTTOM
LOCK
BOTTOM
LOCK
D8224-1
81254.book Page 40 Monday, March 6, 2006 2:29 PM