Chapter 3: Using the Sounder Module 39
SCROLL PAUSE/RESUME
Select SCROLL PAUSE to pause the display to see a ‘snapshot’ of the image. This
allows you to inspect the paused image and place waypoints or VRMs. PAUSE
affects all fishfinder windows, including split Frequency, Zoom and Bottom Lock
modes.
When SCROLL PAUSE is selected, the display stops scrolling but the depth
indication continues to be updated. To resume the scrolling bottom display,
toggle to again select SCROLL RESUME.
3.9 Determining Target Depths and Distance
The fishfinder provides various features to determine depths and distances:
• Depth Digit displays your current depth. The size of this digit can be
changed via the Fishfinder Setup menu. See
Depth Digit Size
on
page 43
.
•
Depth Lines are horizontal dashed lines drawn at regular intervals to indi-
cate the depth from the surface. These are switched on/off via the Fishfinder
Setup menu. See page 43.
•
Target Depth ID displays the depths of recognized targets. These are
switched on/off via the Fishfinder Alarms Setup menu, described on page 46.
ZOOM
ZOOM
FISHFINDER
SETTINGS
FISHFINDER
SETTINGS
A-SCOPE
A-SCOPE
PRESENTATION
PRESENTATION
BOTTOM
LOCK
BOTTOM
LOCK
200 kHz
36 8
ft
20
0
40
60
12
30
32
Depth
Digit
Depth line
Depth
markers
Target
depth ID
D8621-2
81254.book Page 39 Monday, March 6, 2006 2:29 PM
To Next Page
Loading...
