Raymarine Element 12 HV

Questions and Answers

J
Jason SimpsonAug 15, 2025
What to do if my Raymarine Sonar says 'No transducer connected'?
- C
  Catherine AlexanderAug 15, 2025
  If your Raymarine Sonar displays a 'No transducer connected' message, here's what to check: 1. Ensure a transducer is connected and reboot the display. 2. Verify the correct transducer type was selected during the initial start-up wizard by selecting a sonar channel via the Menu button. 3. Inspect connectors and cabling for damage. Look for bent or broken transducer connector pins on the back of the display. Ensure the transducer cable connector is correctly oriented, fully inserted into the display connector, and locked. Check for signs of damage or corrosion on the transducer cabling and connectors, replacing if necessary.
R
Ricardo AllenAug 18, 2025
Why won't my Raymarine Sonar turn on or keeps turning off?
- R
  Robert OwensAug 18, 2025
  There are several reasons why your Raymarine Sonar might not be turning on or keeps turning off: * A fuse may be blown or a breaker tripped. Check the condition of the relevant fuses and breakers and their connections; replace them if needed. * The power supply cable or connections may be poor, damaged, or insecure. Ensure the power cable connector is correctly oriented, fully inserted into the display connector, and locked in position. * The power may be incorrectly connected. Make sure the installation instructions have been followed.
L
lopezgrantAug 22, 2025
How to fix Raymarine Element 12 HV that cannot connect to the network?
- N
  nicolewallsAug 22, 2025
  If your Raymarine Sonar cannot connect to the network, consider the following: * Ensure you are trying to connect to the correct Wi-Fi network; the Wi-Fi network’s name can be found in the router’s settings. * Verify you are using the correct password; the Wi-Fi network’s password can be found in the router’s settings. * Bulkheads, decks, and other heavy structures can degrade or block the Wi-Fi signal. Try repositioning the display and, if possible, the router, so the structure is removed from the direct line of sight between the devices. * Interference may be caused by other Wi-Fi enabled or older Bluetooth enabled devices. If possible, change the Wi-Fi Channel that your router is using and retry the connection.
S
Sean DavisAug 26, 2025
Why is the scrolling image on my Raymarine Element 12 HV Sonar not displaying or intermittent?
- J
  Jamie WilsonAug 26, 2025
  If the scrolling image on your Raymarine Sonar is not displaying or is intermittent, check the following: * Inspect connectors and cabling for damage. Look for bent or broken transducer connector pins on the back of the display. Ensure the transducer cable connector is correctly oriented and fully inserted into the display connector and locked. Check the condition of the transducer cabling and connectors for signs of damage or corrosion, and replace if necessary. * Check the condition of the transducer, ensuring it is not damaged and is free from debris/fouling; clean or replace as necessary. * Ensure the connected transducer is compatible with your system.
M
miranda25Aug 29, 2025
How to troubleshoot no depth reading or lost bottom lock on Raymarine Sonar?
- K
  Kelsey MayAug 29, 2025
  If you're experiencing no depth reading or a lost bottom lock on your Raymarine Sonar, consider these possible causes: * Check that the transducer has been installed according to the instructions provided with it. * If the transducer angle is too great, the beam can miss the bottom. Adjust the transducer angle and recheck. * If the transducer has a kick-up mechanism, verify that it hasn't kicked up due to hitting an object. * Inspect the transducer for damage or fouling, cleaning or replacing it as necessary.
M
Misty WilliamsSep 1, 2025
Why is my Raymarine Element 12 HV Sonar connection so slow or keeps dropping out?
- J
  Johnny WebbSep 1, 2025
  A slow or frequently dropped connection on your Raymarine Sonar could be due to: * Wi-Fi performance degrading over distance. Move the display closer to the router. * Interference from other Wi-Fi or older Bluetooth devices. Try changing the Wi-Fi channel on your router and retry the connection. * Interference from devices on other vessels. Change the Wi-Fi channel on your router and retry the connection.
A
Amanda AdamsSep 4, 2025
What to do if Raymarine Sonar will not start up (restart loop)?
- M
  Mr. Bryan GarciaSep 4, 2025
  If your Raymarine Sonar is stuck in a restart loop, it may be due to software corruption. Try downloading and installing the latest software from the Raymarine website. On display products, as a last resort, attempt to perform a ‘Power on Reset’. Be aware that this will delete all settings / presets and user data (such as waypoints and tracks), and revert the unit back to factory defaults.
G
gonzaleskevinSep 7, 2025
Why can't my Raymarine Sonar find the router network?
- K
  Kelly BaldwinSep 8, 2025
  If your Raymarine Sonar cannot find the router network, consider the following: * Ensure the router is broadcasting and within range of your display. If necessary, move the router and display closer together, then turn the display’s Wi-Fi off and back on again. * Make sure Wi-Fi is enabled on the display. * There may be a router problem. If possible, power cycle the router and then turn the display’s Wi-Fi off and back on again. * The device may not be broadcasting. If possible, enable broadcasting in the router’s settings. * The router’s Wi-Fi network may be incompatible. The Display’s Wi-Fi can only connect to 2.4 GHz networks.
R
Richard YatesSep 12, 2025
Why does my Raymarine Element 12 HV display a “No Fix” status or keeps losing position?
- J
  jonesronaldSep 12, 2025
  The “No Fix” status icon on your Raymarine Sonar, or a display that keeps losing position, may be due to: * Your geographic location or prevailing conditions preventing a satellite fix. Check periodically to see if a fix is obtained in better conditions or another geographic location. * The display being in a poor location. Ensure the display has an unobstructed view of the sky.