Raymarine Element 12 HV - Trunnion bracket mounting

3.4T
runnionbracketmounting
Thesuppliedtrunnionbracketcanbeusedtomountyourdisplayonahorizontalsurface.
Ensureyouhavechosenasuitablemountinglocationforyourdisplay,withsufficientheadroomto
allowthedisplay’sangletobeadjustedorthedisplaytoberemovedifnecessary.Ifinstalling
‘abovehead’,takeextracaretoensuretheknobsaretightenedsufficientlytopreventthemcoming
undoneduetovibrationwhenunderway.
Important:
Beforemountingthedisplay
,ensureyouhavesourcedsuitablefixingsformountingthedisplay’s
trunnionbrackettothedesiredmountingsurface.Fixingtypewillbedeterminedbythemounting
location,andthematerialtypeandthicknessofthemountingsurface.
•Element™7:Requires4xfixings.TheTrunnionbracket’smountingholediameteris4.2mm
(0.17in).
•Element™9andElement™12:Require5xfixings.TheTrunnionbracket’smountingholediameter
is5.75mm(0.23in).
1.UsingtheBrack etasatemplate,markanddrillpilotholesinthemountingsurface.
2.Usingappropriatefixings(notsupplied),securethetrunnionbrackettothemountingsurface.
Ifthemountingsurfaceistoothinforthescrewsprovided,usestainlesssteelmachinescrews,
washersandlockingnuts.Alternatively,reinforcetherearofthemountingsurface.
3.Usingthebrack etknobs,securethedisplaytotheBracket,ensuringtheratchetteethare
correctlyengaged.
Theknobsshouldbetightenedbyhand,sufficientlytopreventthedisplayfrommovingwhilst
yourvesselisunderway.
4.R outeandconnectnecessarycables.
Installation
27