6.Ensurethattheunitfitsintotheremovedareaandthenfilearoundanyroughedgesuntilsmooth.
7
.Drill4holesasindicatedonthetemplatetoacceptthefixings.
8.Placethegasketontotherearofthedisplayandpressfirmlyontotheflange.
9.Connectthepower,dataandothercables.
10.Slidetheunitintoplaceandsecureusingthefixingsprovided.
11.Refitthescrewcovers.
Note:
Thesuppliedgask
etprovidesasealbetweentheunitandasuitablyflatandstiffmountingsurface
orbinnacle.Ifthemountingsurfaceorbinnacleisnotentirelyflatandstifforhasaroughsurface
finish,inadditiontousingthemountinggasketitmayalsobenecessarytousemarine-grade
sealant.
Installation29
To Next Page
Loading...
