Raymarine P70 - Before Using Your Product; Powering the Pilot Controller On

ii.UsetheUPandDOWNbuttonstosetthevalueyouwant,
thenpressSAVEtosavethesettingandreturntothePattern
settingsscreen.
iii.Repeatstepsiandiiasnecessary,fortheotherparameters.
6.Whenallparametersaresetasrequired,andwiththepattern
settingsscreendisplayed,pressAUTO.Theautopilotthen
steerstheboatovertheshingpatternyouselected.
Toreturntomanualsteeringatanytime,pressSTANDBY.
The2mostcommonlyusedshingpatternsareavailablefromthe
ModemenuasPattern1andPattern2,youmayselectandthen
completesteps5and6abovetoquicklyuseyourfavoritepatterns.
5.5Trackmode
Youcanusetrackmodetoautomaticallysteeryourvesselalonga
routeplottedonyourchartplotter.
InTrackmode,theSmartPilotmaintainsaroutebetween
waypointscreatedonachartplottersystem.Itmakesanycourse
changesnecessarytokeepyourvesseloncourse,automatically
compensatingfortidalstreamsandleeway.
TrackmodeisavailableonlyifyouhaveconnectedtheSmartPilotto
asuitablenavigationsystemwhichincludesactivenavigation(Goto
orFollow)inyourchartplotter,andprovidesSeaT alk,SeaT alk
ng
,or
NMEAinformation.
1
2
3
2
D12 111-1
ItemDescription
1.Routeleg
2.Waypoints
3.Destination
Usingtrackmode
Startwithyourconnectedchartplotterfollowingaroute.
1.T oentertrackmode,fromtheMainmenuselectMode.
Pilotmodes33