58 SmartPilot Series Commissioning Guide
Dealer Calibration options
The following Dealer calibration options are available for Displacement, Semi-
Displacement, Planing, Stern Drive (I/O), Work Boat & Sail Boat vessel types.
Parameter Options Your settings
Calibration Lock OFF, ON
Vessel Type DISPLACE, SEMI DISPLACE, PLANING,
STERN DRV, WORK BOAT, SAIL BOAT
Drive Type 3, 4, 5 (S2/S3 only)
Rudder Alignment S1: -9 to +9
S2 & S3: -7 to +7
Rudder Limit 10 to 40
Rudder Gain 1 to 9
Counter Rudder 1 to 9
Rudder Damping 1 to 9
AutoTrim 0 to 4
Response: Gyro
Non-G
1 to 9
1 to 3
Turn Rate Limit 1 to 30
Off Course Angle 15 to 40
Power Steer (Joystick) OFF, 1, 2
AutoRelease OFF, ON
AutoTack Angle 40 to 125
Gybe Inhibit OFF, ON
Wind Type APPARENT, TRUE
Wind Trim 1 to 9
Cruise Speed 4 to 60
AutoAdapt OFF, nth, Sth
Latitude 0 to 80
Variation -30 to +30
Autopilot Reset OFF, ON
81273_1.book Page 58 Thursday, November 10, 2005 8:25 AM
To Next Page
Loading...
