42 ST1000 Plus & ST2000 Plus Tiller Pilots
7. Assemble the rubber cap to one of the 4 self-tapping screws.
8. Secure the socket to the bulkhead using the 4 self-tapping screws.
9. Secure the cable(s) at regular intervals using suitable clips.
10. Assemble the plug to the socket by screwing the ‘floating’ nut onto the
threaded part of the socket by hand.
3 Not used
3
6
42
51
2 Blue
(0 volts)
1 Brown
(12 volts)
4 Yellow
(SeaTalk)
5 Green
(NMEA--)
6 White
(NMEA+)
ST1000+ and ST2000+
Bulkhead Connector
TOP TOP
TOP
Keyway
D7930 -3
Keyway
Keyway
D3297-2
81130_5.book Page 42 Wednesday, June 15, 2005 3:48 PM
To Next Page
Loading...
