ST70 instrument - setting your preferences
Choosing data units
6. Set the units
Use
<
or
>
to scroll to the required units.
Press
ENTER
to save your setting and return to the
Units
summary page.
Press
ENTER
to select the second
Units
summary page.
Press
ENTER
to go to the
Units
select menu.
If you want to set other units, repeat steps 5 and 6.
Returning to normal operation
When you have finished setting the units and the
Units
select
menu is displayed:
1. If necessary, use
<
or
>
to scroll to the
Continue
option.
2. Press
ENTER
to return to your operational page.
D9442-1
i
i
Press ENTER to accept
Wind Speed Units
KTS
Use < & > to adjust.
CANCEL exits without saving.
D9980-1
Press ENTER to select
Units
Continue
4
Card continued
81281_1.book Page 10 Monday, April 30, 2007 3:31 PM
To Next Page
Loading...
