Raymarine ST70 - Changing the Information on a Page

ST70 instrument - organizing your pages
Changing the information on a page
continued ...
You can change the information displayed in any frame on any page. You can either:
• Retain the basic page layout, but change the information in individual frames on a page, as
described on this card, or
• Change the layout of a page by completely rebuilding it, as described onCard 8.
Changing information
1. Go to Main Menu
Press
MENU to display the Main Menu then use < or > to
scroll to
Page Layout .
Press ENTER to display the page select menu.
Shortcuts: From an operational page you can directly access the frame select
box (see step 4 below) for that page, by holding down
ENTER for 1 second.
2. Select the page you want to change
Use
< or > to select the page you want to change.
Press
ENTER to display the Setup options menu for the
selected page.
3. Select the change item option
Use
< or > to scroll to Change an item .
Press
ENTER to display the frame select box.
4. Select the frame you want to change
Use
< or > or or as appropriate, to move the highlight to
the frame you want to change.
Press
ENTER to go to the data group select menu.
D9640-1
Press ENTER to select.
Main Menu
Page Layout
D9260-1
Press ENTER to select.
Page Layout
Page 1 On
Select the page you wish to
configure.
i
D9272-1
Press ENTER to select
Page 1 Setup
Change an item
D9273-1
i
Press ENTER to select
Page 1
Depth
CANCEL exits without saving.
Xxx
xx
0.0
Xxx
xx
0.0
Xxx
xx
0.0
Xxx
xx
0.0
Xxx
xx
0.0
Xxx
xx
0.0
Card
7
81281_1.book Page 21 Monday, April 30, 2007 3:31 PM