Raymarine ST70 - Operating Principles

ST70 instrument - organizing your pages
Switching pages off & on
If you need to quickly access only certain pages, you can switch off the pages you do not
need, and thus reduce the time it takes to access the required pages. This is a particularly
useful feature if you are using the automatic rollover to select pages (see Card 6).
Use the procedure on this card to switch pages off or back on again, as required.
Switching pages on & off
1. Go to Main Menu
Press MENU to display the Main Menu then use < or > to
scroll to
Page Layout .
Press ENTER to display the Page Layout menu.
2. Select the page you want to switch off
At the
Page Layout menu, use < or > to select the page you
want to change.
Press ENTER to display the Setup options menu for the
selected page.
3. Select turn page on/off
Use < or > to scroll to Turn page on/off .
Press
ENTER to display the on/off select box.
4. Select either On or Off
Use < or > to select either On or Off , as required.
Press
ENTER to save this setting and return to the Setup
options menu .
D9640-1
Press ENTER to select.
Main Menu
Page Layout
D9260-1
Press ENTER to select.
Page Layout
Page 1 On
Select the page you wish to
configure.
i
D9538-1
Press ENTER to select
Page 1 Setup
Turn page on/off
D9299-1
i
i
Press ENTER to accept
Page 1
On
Use < & > to adjust.
CANCEL exits without saving.
continued ...
Card
5
81281_1.book Page 13 Monday, April 30, 2007 3:31 PM