ST70 instrument - alarms
Setting alarms
For each alarm, you can:
• Disable or enable the alarm.
• Set the level at which the alarm operates.
Setting up alarms
1. Enter alarm setup
Press
MENU
to select the
Main Menu
then use
<
or
>
to scroll
to
Alarms
.
Press
ENTER
to display the
Alarms
select menu.
2. Select the alarm you want to set
Use
<
or
>
to scroll to the alarm you want to select.
Note: A complete list of alarms is given on Card 12.
Press
ENTER
to display the Alarm setup box.
3. Set alarm status
Press to select the upper (alarm status) adjust box.
Use
<
or
>
to select the alarm status:
•
Off
- disables the alarm.
•
On
- enables the alarm.
4. Set alarm value
Press to select the lower (alarm value) adjust box.
Use
<
or
>
to set the alarm value.
Returning to operating page
To return to your operating page:
1. Press
ENTER
to save your settings and return to the
Alarms
select menu.
2. Press
CANCEL
to return to the
Main Menu
.
3. Press
CANCEL
to return to your operational page.
D9428-1
Press ENTER to select
Main Menu
Alarms
D9551-1
Press ENTER to select
Alarms
Shallow
Adjust the shallow depth alarm.
i
D9429-1
4
On
feet
Press ENTER to accept
Shallow
i
Use < & > to adjust.
CANCEL exits without saving.
Card
13
81281_1.book Page 27 Monday, April 30, 2007 3:31 PM
To Next Page
Loading...
