ST70 instrument - organizing your pages
Resetting data
Resettable data
The maximum, minimum and average running values of some data are accrued in the
instrument. You can reset these values using the procedure on this card.
Most data reset to their current values. An exception is the trip log, which resets to zero.
Reset procedure
1. Requirement
Make sure that the data you want to reset is displayed in at least one of the frames on your
current operational page, then:
2. Enter Main Menu
Press
MENU
to display the Main Menu then if necessary, use
<
or
>
to scroll to the data you want to reset.
3. Reset data
When you have selected the data, press
ENTER
. This resets
the data and returns you to the operational page displayed
before you started the reset procedure.
D9339-1
Press ENTER to reset data
Main Menu
Reset maximum depth
Card
9
81281_1.book Page 25 Monday, April 30, 2007 3:31 PM
To Next Page
Loading...
