ST70 instrument - organizing your pages
Changing the layout of a page
5. Select the frame you want to change
Use
<
or
>
or or as appropriate, to move the highlight to
the frame you want to change.
Press
ENTER
to go to the data group select menu.
6. Select the required data group
Use
<
or
>
to select the data group that contains the data you
want (
Depth
shown here).
If you don’t know which group you need, select
ALL
.
Note: ST70 supports a wide range of data. Refer to Card 14 for a full data list.
Press
ENTER
to go to the data select menu.
7. Choose the data you want
Use
<
or
>
to scroll to the data you want, in the style you
want it displayed.
The styles available depend on the data type, but in many
cases, data is available in all the following formats:
• Analog dial.
• Numeric value.
•Graph.
Press
ENTER
to select the data and return to the frame
select box.
8. Set up other frames
Repeat step 5 to step 7, to set up the remaining frames on the selected page.
9. Complete page setup
When you have completed the setup for the selected page,
ensure the frame select box is displayed, then use
<
,
>
,
and/or as appropriate, to move the highlight to the Save &
Exit icon.
Press
ENTER
to return to your operational page, with the
changes applied.
Press
CANCEL
to return to the
Setup
options menu, without
applying the changes.
D9273-1
i
Press ENTER to select
Page 1
Depth
CANCEL exits without saving.
Xxx
xx
0.0
Xxx
xx
0.0
Xxx
xx
0.0
Xxx
xx
0.0
Xxx
xx
0.0
Xxx
xx
0.0
D9274-1
Press ENTER to select
Page 1 Frame A
Depth
Select the data items group.
i
D9286-1
Press ENTER to select
Page 1 Frame A
Minimum Depth
Select the new data item for this
frame.
i
D9338-1
i
Press ENTER to select
Page 1
Save and exit.
CANCEL exits without saving.
Save & exit
Xxx
xx
0
.0
Xxx
xx
0
.0
Xxx
xx
0
.0
Xxx
xx
0
.0
Xxx
xx
0
.0
Xxx
xx
0
.0
8
Card continued
81281_1.book Page 24 Monday, April 30, 2007 3:31 PM
To Next Page
Loading...
