Raymarine ST70 - Setting the Correct Local Time

Note: Date and time information is available only if your ST70 instrument is receiving GPS data.
If your ST70 instrument is receiving GPS data, you can use the procedure on this card to set
the correct local time as your system time.
Set the time
1. Go to Main Menu
Press
MENU to display the Main Menu then use < or > to
scroll to Display Settings .
Press ENTER to display the Display settings menu.
2. Select Time & Date
At the Display Settings menu, use < or > to scroll to the Time
and & Date option.
3. Time & Date summary
Press
ENTER . A summary of the time and date information is
then displayed.
4. Select time offset
With the summary page displayed, press
ENTER to display
the Time & Date menu.
Use
< or > to scroll to the Set time offset option.
Note: If you want to change the time or date format, use the procedure in the
ST70 Instrument User Reference Manual.
D9328-1
Press ENTER to select
Main Menu
Display Settings
D9423-1
Time & Date
Press ENTER to select
Display Settings
Change the default time and
date settings.
i
D9424-1
i
Time 11:01:03
Date
14/06/07
Time Offset -1 Hrs
Time Format 24-hour
Date Format
dd/mm/yy
These are your current settings.
Time & Date
Press ENTER to continue
D9421-1
Press ENTER to select
Time & Date
Set time offset
ST70 instrument - clocks
Setting the correct local time
continued ...
Card
10
81281_1.book Page 27 Monday, April 30, 2007 3:31 PM