Raymarine ST70 - Sailboat Setup Procedures

This card tells you how to set and use the alarm clock.
Setting alarm clock
1. Select Display Settings
Press
MENU to display the Main Menu then use < or > to
scroll to Display Settings .
Press ENTER to display the Display Settings menu.
2. Select Timers
At the Display Settings menu, use < or > to scroll to the Tim-
ers option, then press ENTER . to display the Timers menu.
Select Alarm Clock
Alarm Clock is the only option.
Press
ENTER to display the Set alarm clock setup box.
3. Set alarm
Press to select the upper adjust box.
Use
< or > to set the alarm clock either On or Off , as required.
Press to select the lower adjust box.
Use
< or > to set the alarm time.
Press
ENTER to save the setting and display the Timers
menu.
D9328-1
Press ENTER to select
Main Menu
Display Settings
D9445-1
Press ENTER to select
Display Settings
Timers
i
Alarm clock
D9627-1
Press ENTER to select
Timers
Alarm Clock
D9626-1
07:25
On
Hrs
Press ENTER to accept
Set alarm clock
i
Press CANCEL to exit without
saving.
ST70 instrument - clocks
Using the alarm clock
Card
11
continued ...
81281_1.book Page 29 Monday, April 30, 2007 3:31 PM