Raymarine ST70 - Further Assistance

Depth
ft
9. 0
Lat
N
Speed
kts
7. 0
Heading
xx
63
Time
24H
11:23
o
47
o
Lon
47
55%
Brightness
Press ENTER to accept
D10030-1
Use these instructions to set the screen brightness to the level you want.
Quick Set Up
To quickly change the screen brightness:
1. Press and release to display the brightness adjust
popup.
2. Use
< or > to set the required screen brightness.
3. Press
ENTER to accept the new brightness setting and
return to your operational page.
Alternative method
1. Go to Main Menu
With any operational page displayed, press MENU to display
the Main Menu, then use < or > to scroll to the Display Set-
tings option.
Press ENTER to show the Display Settings menu.
2. Select option
At the
Display Settings page, use < or > to scroll to the
Brightness option.
Press ENTER to display the Brightness setup box.
3. Set level
Use
< or > to set the screen brightness, as required.
Press
ENTER to save the selection and return to the Display
Settings
menu.
Returning to normal operation
To return to normal operation from the Display Settings
menu:
1. Press
CANCEL to select the Main Menu .
2. Press
CANCEL again, to return to your operational page.
ST70 instrument - getting started
Setting the screen brightness
D9328-1
Press ENTER to select
Main Menu
Display Settings
D9327-1
Press ENTER to select
Display Settings
Brightness
Adjust the display brightness
i
D9336-1
55
Brightness
i
%
Press ENTER to accept
< & > adjust brightness.
CANCEL exits without saving.
Card
2
81281_1.book Page 5 Monday, April 30, 2007 3:31 PM