16
ST7000 Plus Autopilot Control Unit Owner’s Handbook
To operate ST60 or ST80 instruments from ST7000 Plus:
1. Select either the INST REM Data Page (for control of standard
instruments) or the MAXI REM Data Page (for Maxiview
instruments).
2. Using the summary of control functions shown in the following
illustration, carry out the required instrument control functions
from your ST7000 Plus.
Note: The manner used to show a currently-selected instrument
depends on the instrument type:
• On ST80 instruments, the characters are displayed in inverse video
(i.e. white characters on a black background).
• On ST60 digital instruments, a
REMOTE
legend is displayed.
• On ST60 analogue instruments, either one or both of the
TRUE/MAG
or
TRUE/APP
annunciators flash on the digital display.
118ch02.p65 07/01/99, 12:4116
To Next Page
Loading...
