54
ST7000 Plus Autopilot Control Unit Owner’s Handbook
10. Press one of the instrument group keys on the ST7000 Plus to
allocate it to the selected group of instruments.
11. If you are creating more than one group, repeat the procedures
described in actions 3 to 10.
12. When all instrument groups have been set up, hold down the
track and set crs keys for 1 second, to return to group setup
mode.
13. Hold down the track and set crs keys for 2 seconds, to return to
normal operation.
Grouping Maxiview Instruments
The instrument group key functions for setting up Maxiview
instrument groups are as follows:
Select the required Maxiview instrument
118ch04.p65 07/01/99, 12:4354
To Next Page
Loading...
