56
ST7000 Plus Autopilot Control Unit Owner’s Handbook
10. Press one of the instrument group keys on the ST7000 Plus to
allocate it to the selected group of display heads.
11. If you are creating more than one group, repeat the procedures
described in actions 3 to 10.
12. When all instrument groups have been set up, hold down the resp
and track keys for 1 second, to return to group setup mode.
13. Hold down the resp and track keys for 2 seconds, to return to
normal operation.
118ch04.p65 07/01/99, 12:4356
To Next Page
Loading...
