Raymarine ST70+ - Switch on; Selecting Language

14 ST70+ User Reference Manual
Switch on .
At an ST70+ keypad, press the power button to
switch on the displays. When an ST70+ system is
first switched on after installation, one display
shows a select
Language menu. This is the active
display
Other displays show a Select Display icon .
If necessary use the Select Display button on any
ST70+ keypad to select another display as the active display, i.e. so it shows the
select
Language menu.
Selecting language
Scroll to select the required language.
CAUTION:
Be sure to select the correct Language. If you select the wrong language,
the ST70+ system will be difficult to use.
If you are sure you have selected the language you want, press OK to confirm the
selection, to display the ‘Welcome’ screen.
When you are ready to proceed, press
OK to display the Vessel Type menu.
D11140-1
Language
English (UK)
Press OK to select
D11407-1
Selected display
y
Language
English (UK)
Press OK to select
85024_1.book Page 14 Tuesday, January 27, 2009 11:31 AM