Raytech WR14 - Command Syntax and Control Interfaces

Version 3.03
WR14 / WR50-12/13 Winding Resistance Meter Instruction Manual
100
RAYTECH USB DRIVER FOR T-BASE
The Software Drivers must be activated to work with the powerful Software T-Base Pro (for more
information see “Raytech T-Base Pro” on page 89).
Enter the Code '2001#' to activate the USB Driver
for the T-Base Pro.
For the changes to take effect, power down and
restart the system.
ACTIVESYNC FOR TOOLBOX
Activate ActiveSync to work with the previous (older version) of Raytech Toolbox Software.
Enter the Code '2000#' to activate ActiveSync.
For the changes to take effect, power down and
restart the system.