WR14 / WR50-12/13 Winding Resistance Meter Instruction Manual
Although the measurement is finished, the timer
continues to operate. This allows further
measurements on other windings of the same
transformer.
The timer can be halted, at any time, by pressing
the Timer button.
ANALYZING THE HRT RESULTS
Select the measurement results you would like to analyze.
Analyses of the recorded data is slightly different if Profiles mode has been used or not.
Profiles: From the Main Screen, select:
- Profiles
- The Transformer
- Info
- The measurement number
- Result
- The measurement date
- Diagram
No Profiles: From the Main Screen, select:
- Results
- The measurement date
- Diagram
Displayed on the screen are the selected results
shown graphically.
If you have the Heat Run Test Software license, the
"Analysis" Button is visible and can be selected for
the calculation.
To Next Page
Loading...
