WR14 / WR50-12/13 Winding Resistance Meter Instruction Manual
QUICK START GUIDE
INSTRUMENT OPERATION – PROFILES DEACTIVATED
1. Power on the instrument. Press Setup.
2. Select the Test Current, press Range or
Setup/Range. Press OK.
3. Press the Start button.
4. The results will be displayed. Press Stop.
5. The Safe indicator will show green.
WARNING!
Wait until the green light shows “Safe” before
handling the cables.
For examples of transformer connections, see
the next pages.
The checkbox for “Use Profiles” is not selected in the Setup under General.
To Next Page
Loading...