Raytech WR14 - Setup Menu Configuration Options

Version 3.03
WR14 / WR50-12/13 Winding Resistance Meter Instruction Manual
32
DEMAG
The Demagnetization procedure demagnetizes the test object (e.g. transformer core). The Demag
button appears after measurement is finished.
Press Demag.
Select the demagnetizing current, which is usually
the same current as the test current, and then press
start.
The Demagnetizing procedure runs automatically.
For a technical description of the demagnetizing feature, see “Demagnetizing” on page 109.