WR14 / WR50-12/13 Winding Resistance Meter Instruction Manual
ERROR MESSAGES
Raytech instruments are designed to be precise, rugged and trouble free. In most cases, many
operators will never see any error messages.
The emergency switch is activated
.
In this condition it is not possible to start a
measurement.
Exit this message screen by touching “OK.”
The system will revert to a pretest or main screen
similar to the one shown.
Because the emergency switch is still depressed,
you are not able to start a new measurement.
All other features of the system such as storing,
printing are still active.
Turn the Emergency Stop button clockwise to
release.
In case of Interlock-Modification for extend safety circuit the same message appears. For more
information, see “Extended Safety Circuit Type” on Page 86.
To Next Page
Loading...
