WR14 / WR50-12/13 Winding Resistance Meter Instruction Manual
10M CABLE EXTENSION SET FOR THE WR14-R
The WR14-R is available with the optional 10m cable extension sets instead of the 5M standard cable
set.
The Cable Extension Set for the WR14-R consists of the following cables:
10M Extensions for the Current
Cables (Positive and Negative)
10M Extensions for the Potential
Cables (Channel 1, Positive and
Negative)
10M Extensions for the Potential
Cables (Channel 2, Positive and
Negative)
When ordering the optional 10M Cable Extension Set with a new system, the standard 5M cable set is
omitted.
To Next Page
Loading...