WR14 / WR50-12/13 Winding Resistance Meter Instruction Manual
BATTERY OPTION - WR14R
The WR14R is available with Battery and/or Mains operation.
With the battery operating feature, the measurement will not halt if power is interrupted on the mains
input. This feature is very helpful if continuous tests are being conducted. e.g. heat run tests.
If you are using the Battery Option, there is a Battery
Symbol on the top of the main screen. It indicates the
Battery status and the charging condition.
With a full Battery you are able to measure 200
single measurements at 15 Amperes.
Mains supply present
A Mains (plug) connector symbol is shown inside the Battery and the green LED on the power switch is
blinking. This indicates that the system is connected to the mains.
Battery charging
The area inside the Battery indicator moves from the left to the right with a blinking green LED on the
Mains power switch indicating that the battery is being charged.
Charging condition
Visual indication of the area inside the Battery indicator dictates the charging condition:
If the Battery area is completely filled green, the Battery is 100% charged.
This Option is standard in the WR14 (field case version).
To Next Page
Loading...
