Raytech WR14 - Page 43

Version 3.03
WR14 / WR50-12/13 Winding Resistance Meter Instruction Manual
42
CONFIG
The Config (Configuration) Menu may look differently depending upon if Profiles is selected or not. For
more information about using Profiles or to deactivate Profiles, see “Operating Menu” on page 23.
With Profiles Deactivated
6
In the tab Config, you can change the name (Caption) of the measurement channels.
Click on the white field to change the name
(Caption) of the measurement channels.
Enter a name.
6
Do not select “Use Profiles” in the Setup under “General.”