Raytech WR14 - Temperature Correction Setup and Application

Version 3.03
WR14 / WR50-12/13 Winding Resistance Meter Instruction Manual
48
RANGE
Selects the current range
9
for the measurement.
Auto Close Setup:
Closes the Setup Window after the Current Range
selection is made without pressing OK.
For adjusting the User Settings:
Press “Set”
Adjust all 3 settings by moving the cursor left or right
to the desired Current level. Press OK when
finished.
9
The maximum current of the WR50 is 50A. The maximum current of the WR14 is 15A.