WR14 / WR50-12/13 Winding Resistance Meter Instruction Manual
Description
Raytech’s Automatic Transformer Observing System, ATOS, combined with T-Base Pro software is an
extremely powerful system for transformer measurements. With one cabling, all winding resistance and
turns ratio measurements are done easily. Operation of the devices can be done by touch screen, or on
a remote computer using T-Base Pro.
Compared to measurements with simple devices, measuring with an ATOS leads to drastically reduced
measuring time and increased performance. Using T-Base Pro makes data collecting with a memory
stick unnecessary.
ATOS components are connected by USB or RS 232 to your computer. The software link from devices
to the operating system is done by the Raytech Native Driver. This software Driver is included with the
T-Base Pro release.
With T-Base Pro, creating transformer profiles and importing and exporting of measurements are
accomplished much easier then manually performing these operations.
Powerful search functions and a modern graphical user interface support users in handling transformer
profiles and measurements. Test Reports are available in several output formats.
Complete automated transformer measurements are accomplished with the Sequence Add-On. All
settings of Raytech devices are available by remote and can be configured individually. And any test
procedure based on the available devices can be defined.
In the previous example, a Custom Add-On sends passed transformer measurements in the required
format to the factory database. Access to any data set in this database is also provided by this Add-On.
Add-Ons can be programmed by Raytech, a customer or a third party using the provided Software
Development Kit (SDK).
The Raytech Add-On Remote I/O to External Software sends email notifications to supervisors when a
transformer is tested successfully or if a failure has occurred.
To Next Page
Loading...
