RayTek MI Miniature Infrared Sensor - 2 Description

Description
MI 3
2Description
The miniature infrared sensors MI are noncontact infrared
temperaturemeasurementsystems.Theyaccuratelyandrepeatably
measure the amount of energy emitted from an object and convert
thatenergyintoatemperaturesignal.
Thefollowingoutputsareavailable:
• J‐Thermocouple
• K‐Thermocouple
• 0‐5Volt
• 0‐20mAor
4‐20mA
• 10mV/°Cheadambienttemperaturesignal
• RS232interface
• optional:RS485interface
ThesensingheadisprotectedbyaruggedIEC529(IP65,NEMA‐4)
stainlesssteelhousing,andisconnectedtotheelectronicboxwitha
1m (3ft) cable. Longer cables
 must be ordered as an option. The
electronic box is separa ted from the sensing head. This allows the
sensing head to be used in hot environments up to 180°C (356°F)
without cooling. The electronic box can only be used in ambient
temperaturesupto65°C(150°F).
MIwillallowsensing
heads tobeinterchangedbyprogrammingin
the unique calibration data associated with different heads. Ta ke
specialcareforthesensingheadcalibrationdataprintedonthecable!