Operator manual
Compass
STD 22
110--233
STD22 Compact and STD22
9
3646/110 --233.DOC010102
Edition: July 1, 2005
The STD 22 gyro compass consists of
-- the 110-233NG001 gyro compass
-- Operator Unit, 130-613
-- Distribution Unit, 138-118
Optional features:
-- AC/DC converter, 121-062
The output interfaces
on the STD 22 are as follows:
-- Course (corrected -- SEC) as NMEA or course bus
-- D a t a b u s ( C A N -- B u s )
-- Status signals (alarms, error messages, warnings)
-- Step (6steps/degree)
-- RS 232 for courseprinter connection
-- Rate of turn
-- D V -- b u s
The input interfaces
on the STD 22 are as follows:
-- NMEA Position
-- NMEA Speed
-- Pulse Log Direction
-- Pulse Log
Status signals or pulses
Optional features:
Course data from a magnetic sonde (108--010)
Voltage is supplied to the gyro compass via the Distribution Unit or is directly connected
to the compass itself.
There are separate manuals for the Operator Unit and for the Distribution Unit.
The Quick Settling function is activated via the Operator Unit.
The Speed Error Correction function is available only when a GPS or Pulse Log is
connected. The relevant data must be supplied via the Distribution Unit.
To Next Page
Loading...
Need help?
General
