Operator manual Compass
STD 22
110--233
STD22 Compact and STD22
III
3646/110--233NG001.DOC010102
Edition: Feb. 17, 2006
Caused by technical progress the PC--Boards of the
Gyro Compass are changed.
Due to that some pictures and/or procedures have been
changed.
Respective changes are marked with “E10”.
The AC supply voltage (ships mains) may drop out.
This leads to a restart of the gyrocompass and a new settling
stage.
The heading information during this settling stage has a
reduced accuracy (see section 2.1.2).
Therefore a continously supply with 24VDC should be guar-
anteed.