Need help?Do you have a question about the RC-Plus PLUS POWER 80 and is the answer not in the manual?
Essential safety rules for charger operation, including supervision and environmental conditions.
Warnings about charging incompatible batteries and proper connection procedures.
Covers delta-peak sensitivity, auto-charge limits, capacity/temperature/time limits, input power monitoring, cooling fan, and data storage.
Explains suitability for LiFe, Lilo, LiPo and the CV/CC charging method.
Guides on setting charge current and voltage for Lithium batteries, and initiating the charging process.
Details charging Lithium batteries in balance mode to normalize cell voltages via the balance port.
Describes fast charge and storage modes for Lithium batteries.
Provides instructions for discharging Lithium batteries safely, adhering to manufacturer voltage recommendations.
Explains how the charger monitors individual cell voltages during storage/discharge and handles errors.
Details automatic ('Aut') and manual ('Man') charging modes for NiMH/NiCd batteries.
Describes setting up charge/discharge cycles for balancing, refreshing, or break-in of NiMH/NiCd batteries.
General| Charging Power | 80W |
|---|---|
| Battery Type | LiPo, LiHV, LiFe, LiIon, NiMH, NiCd, Pb |
| LiPo/LiHV/LiFe/LiIon Cell Count | 1-6S |
| NiMH/NiCd Cell Count | 1-15S |
| Pb Voltage | 2-20V |
| Charge Current | 0.1-10A |
| Output Current | 0.1-10A |
| Charging Ports | 1 |
| Input Voltage | 100-240V AC |
| Discharge Current | 0.1-2.0A |
| Balance Current | 300mA per cell |
| Protection Features | Overcharge, over-discharge, short circuit, reverse polarity, over-temperature protection |
| Compatibility | Compatible with most LiPo, LiHV, LiFe, LiIon, NiMH, NiCd, and Pb batteries |
To Next Page
