22
Selecting a Channel, Subscriber ID or
Group ID
Once the required zone is displayed (if your
radio has multiple zones), turn the programmed
Channel Selector Knob to select the channel,
subscriber alias or ID, or group alias or ID.
Receiving and Responding to a Radio Call
Once the channel, subscriber ID or group ID is
displayed, you can proceed to receive and respond
to calls. To unscramble a privacy-enabled call, your
radio must have the same Privacy Key, OR the
same Key Value and Key ID (programmed by your
RCA dealer), as the transmitting radio (the radio
you are receiving the call from).
Receiving and Responding to a Group Call
To receive a call from a group of users, your
radio must be congured to be part of the
group. When you receive a Group Call:
1. The LED blinks green.
2. BR300D
TM
Only - The rst line of the display
shows the caller alias, and the RSSI icon. The
second line displays the group alias and the
Group Call icon.
3. Press the [PTT] button to respond to the call
and the LED indicator lights up red. Note: If
Talk Permit Function is enabled, wait for the
Talk Permit Tone to nish and then speak
clearly into the microphone.
4. Release the [PTT] button to listen.
5. If there is no voice activity for a set period
of time, the call ends.
Receiving and Responding to a Private
Call
A Private Call is a call from one individual radio
to another individual radio.
There are two types of Private Calls. The
rst type is when a radio presence check is
performed prior to setting up the call. The
second sets up the call immediately. When you
receive a Private Call:
To Next Page
Loading...
