Alarm Successful.
3. Depending on the setting selected, you
can press the [PTT] to talk or your radio’s
microphone is automatically activated,
allowing you to communicate with the other
radio without pressing the [PTT] button.
4. To Respond to an Emergency Alarm, press
any button to stop all Emergency Alarm
received indications. Press [PTT] button to
initiate a call with the emergency initiating
radio.
Exiting Emergency Mode
Your radio exits Emergency mode automatically
when any of the following occurs:
- Emergency Alarm acknowledgement is
received (for Emergency Alarm only)
- All retries to send the alarm have been
exhausted
- The Emergency Off button is pressed
- The [PTT] button is pressed
- Your radio is powered off
ADVANCED FEATURES
Radio Check
If enabled, this feature allows you to determine
if another radio is active in a system without
disturbing the user of that radio. No audible or
visual notication is shown on the target radio.
Note: This feature is only applicable for
subscriber aliases or IDs in digital mode.
Sending a Radio Check (BR300D
TM
Only)
Using the programmed Radio Check button.
1. Press [O] to access the menu.
2. Press [<] or [>] button to navigate to Contacts
and press the [O] to select.
3. Press [<] or [>] to access the required
subscriber alias or ID and press [O] to select.
Or press [<] or [>] button to Manual Dial, then
press [O], input subscriber ID.
4. Press [<] or [>] to Radio Check, then press [O]
to select. Wait for acknowledgement.
To Next Page
Loading...
