menu via Contacts or Manual Dial.
Receiving and Responding to a Call Alert
When you receive a Call Alert page, on the
display you see Call Alert that alternates with
the alias or ID of the calling radio.
1. You hear a repetitive tone.
2. Press and release [PTT] button to conrm
the prompt. Or - press [O] to select
”Ignore?” and to exit Call Alert.
Making a Call Alert from the Contact List
(BR300D
TM
Only)
1. Press [O] to access the menu.
2. Press [<] or [>] to navigate to Contacts and
press [O] to select.
3. Press [<] or [>] to nd the desired subscriber
alias or ID and press [O] to select. OR - Press
[<] or [>] to the Manual Dial option and
press [O].
4. Use the keypad to input the subscriber ID
and press [O].
5. Use [<] or [>] to nd Call Alert and press
[O].
6. The display shows Call Alert: <Subscriber Alias
or ID>, indicating that the Call Alert has been
sent.
7. The LED lights up red when your radio is
sending the Call Alert.
8. If the Call Alert acknowledgement is received,
a tone sounds and the display shows
Call Alert successful. OR - If the Call Alert
acknowledgement is not received, a tone
sounds and the display shows Call Alert Failed.
Text Message Features (BR300D
TM
Only)
Your radio is able to receive data such as a text
message from another radio. The maximum text
message length is 138 characters.
Navigating to Messages (BR300D
TM
Only)
1. Press [O] to access the menu.
2. Press [<] or [>] to navigate to Messages.
Note: Press [C] button at any time to return to
To Next Page
Loading...
